Select Page

Intelligent Security & Fire Protection

Intelligent Security & Fire Protection

Fire Shutters with 4 integrity ratings…

EA security fire shutter doors are electrically operated vertical fire shutters, consisting of a 75mm scrolled curtain and galvanised steel box assembly and guide rails. Their design allows for both face or reveal installations and the box, curtain, guide rails and bottom rail can all be powder coated as an optional extra.

Designed to be a security barrier during normal use and to be closed automatically during an emergency situation or test. In the event of receiving a fire alarm signal, the shutter will perform a powered descent to create a fire resistant barrier. If power failure occurs, the shutter will cloes using the intelligent battery backup feature.

Key Features

  • Greater access to end plate fixtures
  • Fast and easy attachment of axle with two shelf bracket and easy access bolts
  • Increased range of sizes
  • Range of fire rating (including 30 minute)
  • No more motor handling, easily interchargeable on site
  • Non-welded assemly design allowing post order alteration of guide orientations
  • Increased range of hood configurations
  • Symmetrical design of guide offsets
  • Fixing kits available
  • Can be used daily as a shutter
  • A full range of RAL colours available.

 

Intelligent Features

Modular design

Post order alteration enabled due to modular design features of the redesigned and redeveloped shutter.

Chamfered shutterbox

Boxes are supplied in sleeved sections to allow for expansion starting from 250 mm endplate, depending on shutter height and component integrity requirements.

Controls

Fully tested control options with separate battery backup.

Finish

Galvanised as standard or powder coated to RAL or BS colours at extra cost.

Curtain

A single skin 75 mm scrolled.

Techinal Drawings

Full technical CAD drawings available.

Motor

The Fire Shutter is powered using a 240 V AC tubular motor which is supplied as standard with a 2.5 m 4 core cable.

Guide rails

65 mm, 75 mm or 100 mm deep, depending upon shutter width mounted on steel angles for fixing. Available for face or reveal installations.

Bottom rail

T Sectioned steel bottom slat 49 mm high x 74 mm deep

Fire Shutter Specifications

Testing &Standards, tested and approved by Warringtonfire, BSEN 16034, BSEN 13241 , available in 30,60,120 or 240 minutes rating.

 Optional Extras 

Localised sensors such as smoke and heat detectors, a range of audio visual devices and emergency retract switches can be connected to the panels using a 24 V DC supply from the panel. 

  • Key Switch

 

Battery Backup & Control Options

Each of our control and battery backup combinations have been fully tested through the UKAS accredited test body, and are simple to install thanks to our quick installation guides. Battery backup brackets are also available, making mounting even easier. Covering a wide range of installation scenarios, our control options also allow for additional audio and visual safety devices to be specified.

Simple control panel with battery backup

A simple plug and play option, offering quick and easy configuration on site, particularly useful when wiring into an existing building management system. It has a small relay unit which is ideal for tight installations where space is restricted. The panel comes with simple control options to operate the shutter and can be directly plugged into the battery backup unit provided.

Control panel with accessory add-on’s with battery backup

The SF1 Fire Shutter Control Panel allows the option to add accessories, such as local heat sensors, and alarm equipment. This option is ideal for projects with no existing building fire management system, or where the shutter is over an egress route and needs local heat detection. The panel is easily configurable with the battery backup unit, and also features built in audio and visual warnings.

Audio & Visual Warnings options with battery backup

The SFP Fire Control Panel also gives the option for additional accessories, allowing more specific set up with the controls and alarm. Further to this the controller also features audio/visual warnings, with the ability to programme features such as close delay.

Manual Overide option with battery backup

As well as delivering the same benefits as the SFP, the SFP+ offers the option of a closing override button, allowing the user to override the closing action temporarily in an emergency situation, allowing for escape.*

*Under exceptional circumstances whereby health and safety have special requirements and only when deemed necessary by the fire officer.

Your SeceuroFire Checklist

A name you can trust

When choosing an EA fire door  you can be reassured by the values behind the product.

A perfect fit
With every made to measure EA fire door shutter, we can meet your design needs.

Neat design
All motors are within the housing which is available in a range of sizes to minimise space requirements.

Fully tested
Conforming to UK and European standards for the property owners peace of mind.

Local supply and installation
A national network of trained installers.

Manufactured in the UK
Using the latest machinery and equipment, all EA supplied fire door shutters are proudly manufactured and assembled in the UK.

Multiple options

A choice of 30, 60, 120 and 240 minute integrity ratings provide a wide choice of solutions for all fire protection requirements.

Reach Us

01376 780840
07522 846 797

info@eagaragedoors.co.uk

www.eagaragedoors.co.uk

Leave A Message

2 + 6 =